|
E-Z Sleeve
The concept of a thin wall flanged sleeve is very popular for fast sleeving
of shafts and yokes. However the results often run short of expectations. The
soft sleeve lacks durability and operates with too much resistance (resulting in
excessive heat and failure).
E-Z Sleeve eliminates these problems and provides a long life sleeve at an
affordable price.
What sets E-Z Sleeve
apart from other sleeves?
- Hard Chrome Coating - E-Z Sleeves stainless
steel sleeves are hard chromed to a hardness of 68RC.
- Lower Coefficient of Friction - Hard chrome
provides a smoother surface and has a lower coefficient of friction that
reduces heat and seal wear.
- Better Seal Fit - E-Z Sleeves minimize the
change to the original shaft diameter. This provides a better fir between
the repaired shaft the seal.
Specification
Table
|
Part Number
|
- A
- Shaft Diameter Range
|
- B
- Width on shaft
|
- C
- Overall width
|
- D
- Flange diameter
|
- E
- Installation depth
|
| 99100 |
0.995 |
1.002 |
0.312 |
0.437 |
2.032 |
| 99101 |
0.995 |
1.002 |
0.312 |
0.437 |
2.032 |
| 99112 |
1.123 |
1.127 |
0.312 |
0.438 |
0.688 |
| 99116 |
1.123 |
1.127 |
0.375 |
0.500 |
0.688 |
| 99125 |
1.245 |
1.253 |
0.312 |
0.437 |
0.875 |
| 99128 |
1.254 |
1.263 |
0.312 |
0.437 |
0.875 |
| 99138 |
1.368 |
1.374 |
0.500 |
0.625 |
1.000 |
| 99139 |
1.372 |
1.378 |
0.500 |
0.630 |
1.000 |
| 99143 |
1.432 |
1.438 |
0.563 |
0.688 |
1.016 |
| 99144 |
1.435 |
1.441 |
0.375 |
0.500 |
1.016 |
| 99149 |
1.496 |
1.503 |
0.562 |
0.688 |
1.016 |
| 99150 |
1.497 |
1.503 |
0.375 |
0.500 |
1.016 |
| 99152 |
1.519 |
1.526 |
0.438 |
0.563 |
1.016 |
| 99155 |
1.549 |
1.555 |
0.438 |
0.563 |
1.016 |
| 99156 |
1.559 |
1.565 |
0.563 |
0.688 |
1.016 |
| 99157 |
1.572 |
1.578 |
0.512 |
0.630 |
1.023 |
| 99162 |
1.622 |
1.628 |
0.562 |
0.688 |
0.812 |
| 99169 |
1.647 |
1.653 |
0.563 |
0.689 |
0.827 |
| 99170 |
1.735 |
1.742 |
0.375 |
0.500 |
1.032 |
| 99172 |
1.745 |
1.753 |
0.375 |
0.500 |
1.032 |
| 99173 |
1.745 |
1.753 |
0.875 |
1.000 |
1.032 |
| 99174 |
1.745 |
1.753 |
0.562 |
0.688 |
1.032 |
| 99175 |
1.745 |
1.753 |
0.750 |
0.875 |
1.032 |
| 99176 |
1.759 |
1.767 |
0.562 |
0.688 |
1.032 |
| 99177 |
1.767 |
1.775 |
0.550 |
0.669 |
1.032 |
| 99181 |
1.807 |
1.815 |
0.562 |
0.688 |
1.250 |
| 99187 |
1.869 |
1.878 |
0.562 |
0.688 |
1.250 |
| 99189 |
1.887 |
1.893 |
0.550 |
0.668 |
0.984 |
| 99193 |
1.932 |
1.940 |
0.562 |
0.688 |
1.250 |
| 99196 |
1.965 |
1.971 |
0.550 |
0.668 |
0.984 |
| 99199 |
1.996 |
2.003 |
0.562 |
0.688 |
2.060 |
| 99200 |
1.996 |
2.003 |
0.875 |
1.000 |
2.060 |
| 99210 |
2.123 |
2.128 |
0.500 |
0.750 |
1.280 |
| 99212 |
2.122 |
2.130 |
0.780 |
0.937 |
1.375 |
| 99218 |
2.185 |
2.192 |
0.781 |
0.938 |
1.312 |
| 99220 |
2.198 |
2.205 |
0.500 |
0.625 |
1.315 |
| 99225 |
2.248 |
2.255 |
0.780 |
0.937 |
1.375 |
| 99227 |
2.248 |
2.255 |
0.312 |
0.438 |
1.313 |
| 99237 |
2.372 |
2.378 |
0.780 |
0.937 |
1.375 |
| 99238 |
2.372 |
2.378 |
0.594 |
0.750 |
1.375 |
| 99240 |
2.374 |
2.380 |
0.526 |
0.683 |
1.375 |
| 99248 |
2.497 |
2.506 |
0.500 |
0.656 |
1.393 |
| 99249 |
2.487 |
2.506 |
0.780 |
0.937 |
1.393 |
| 99250 |
2.497 |
2.506 |
0.780 |
0.937 |
1.375 |
| 99251 |
2.509 |
2.516 |
0.780 |
0.906 |
1.375 |
| 99253 |
2.497 |
2.506 |
0.555 |
0.650 |
0.890 |
| 99254 |
2.554 |
2.562 |
0.787 |
0.905 |
1.375 |
| 99256 |
2.559 |
2.566 |
0.781 |
0.938 |
1.375 |
| 99262 |
2.623 |
2.631 |
0.780 |
0.937 |
1.500 |
| 99264 |
2.620 |
2.627 |
0.780 |
0.906 |
1.500 |
| 99272 |
2.748 |
2.756 |
0.406 |
0.563 |
1.250 |
| 99274 |
2.743 |
2.751 |
0.780 |
0.937 |
1.375 |
| 99275 |
2.748 |
2.756 |
0.780 |
0.937 |
1.375 |
| 99276 |
2.750 |
2.759 |
0.787 |
0.945 |
1.375 |
| 99282 |
2.837 |
2.844 |
0.500 |
0.656 |
1.250 |
| 99287 |
2.871 |
2.879 |
0.780 |
0.937 |
1.375 |
| 99289 |
2.949 |
2.956 |
0.594 |
0.689 |
1.102 |
| 99290 |
2.935 |
2.943 |
0.500 |
0.640 |
1.331 |
| 99291 |
2.987 |
2.996 |
0.484 |
0.625 |
1.331 |
| 99293 |
2.935 |
2.943 |
0.780 |
0.938 |
1.500 |
| 99294 |
2.949 |
2.956 |
0.866 |
1.024 |
1.312 |
| 99298 |
2.987 |
2.996 |
0.563 |
0.688 |
1.375 |
| 99299 |
2.987 |
2.996 |
0.812 |
1.000 |
1.250 |
| 99300 |
2.998 |
3.006 |
0.812 |
1.000 |
1.281 |
| 99303 |
2.998 |
3.006 |
0.625 |
0.812 |
1.063 |
| 99307 |
3.123 |
3.132 |
0.550 |
0.709 |
2.031 |
| 99311 |
3.119 |
3.126 |
0.688 |
0.813 |
2.000 |
| 99312 |
3.119 |
3.126 |
0.812 |
1.000 |
2.000 |
| 99313 |
3.141 |
3.150 |
0.750 |
0.886 |
1.375 |
| 99315 |
3.145 |
3.153 |
0.827 |
0.945 |
1.375 |
| 99317 |
3.145 |
3.153 |
0.433 |
0.591 |
1.375 |
| 99322 |
3.246 |
3.253 |
0.812 |
1.000 |
1.375 |
| 99324 |
3.248 |
3.256 |
0.595 |
0.720 |
1.500 |
| 99325 |
3.248 |
3.256 |
0.812 |
1.000 |
1.500 |
| 99337 |
3.371 |
3.379 |
0.812 |
1.000 |
1.500 |
| 99346 |
3.495 |
3.503 |
0.625 |
0.812 |
1.348 |
| 99347 |
3.498 |
3.506 |
0.312 |
0.500 |
1.348 |
| 99349 |
3.499 |
3.507 |
0.625 |
0.812 |
1.348 |
| 99350 |
3.498 |
3.506 |
0.812 |
1.000 |
1.347 |
| 99360 |
3.618 |
3.629 |
0.812 |
1.000 |
1.750 |
| 99362 |
3.622 |
3.629 |
0.812 |
1.000 |
1.750 |
| 99363 |
3.622 |
3.629 |
0.500 |
0.625 |
1.750 |
| 99364 |
3.739 |
3.746 |
0.469 |
0.594 |
1.750 |
| 99367 |
3.748 |
3.756 |
0.344 |
0.500 |
1.750 |
| 99369 |
3.736 |
3.743 |
0.827 |
0.945 |
1.750 |
| 99372 |
3.748 |
3.756 |
0.688 |
0.875 |
1.875 |
| 99374 |
3.739 |
3.746 |
0.344 |
0.500 |
1.750 |
| 99376 |
3.745 |
3.752 |
0.563 |
0.688 |
1.750 |
| 99395 |
3.995 |
4.006 |
0.600 |
0.725 |
2.125 |
| 99399 |
3.995 |
4.006 |
0.812 |
1.000 |
2.125 |
| 99400 |
3.995 |
4.006 |
0.650 |
0.775 |
2.125 |
| 99401 |
3.995 |
4.006 |
0.500 |
0.625 |
2.125 |
| 99450 |
4.496 |
4.504 |
0.813 |
1.000 |
1.250 |
| 99498 |
4.998 |
5.006 |
0.688 |
0.875 |
1.438 |
| 99499 |
4.998 |
5.006 |
0.813 |
1.000 |
1.438 |
| 99599 |
5.992 |
6.004 |
1.000 |
1.250 |
2.030 |
| 99601 |
5.992 |
6.004 |
0.500 |
0.750 |
2.030 |
| 99700 |
6.994 |
7.005 |
1.000 |
1.250 |
1.688 |
- The DT Components® product line is
distributed exclusively by North Coast Bearings LLC
- ©North Coast Bearings LLC
2008 All Rights Reserved
- DT Components is a registered
trademark of The Timken
Company
- ™-Trademark of North Coast Bearings LLC
| 